PTS820 J15M SMTR LFS

PTS820 Series Microminiature SMT Top Actuated Features/Benefits • 3.9 x 2.9 mm footprint • Three different heights • High number of cycles • Reduced footprint Typical Applications • Control panels • Nomad devices • Remote controls • Keyless entry system B Electrical FUNCTION: momentary action CONTACT ARRANGEMENT: 1 make contact = SPST N.O. TERMINALS: J type for SMT TRAVEL: 0.2mm + 0.1mm / -0.05 mm MAXIMUM VOLTAGE: 12 VDC MAXIMUM CURRENT DC: 50 mA DIELECTRIC STRENGTH: 100 VA C (1mn) CONTACT RESISTANCE: ≤ 100 mΩ INSULATION RESISTANCE: ≥ 100 MΩ BOUNCE TIME: ≤ 10 ms Operating Life Height Pegs Force (gf) Cycles mm PTS820 J25M SMTR LFS 160 ± 50 200,000 2.5 No PTS820 PTS820 PTS820 PTS820 PTS820 PTS820 PTS820 PTS820 PTS820 PTS820 PTS820 J25K SMTR LFS J25MP SMTR LFS J25KP SMTR LFS J20M SMTR LFS J20K SMTR LFS J20MP SMTR LFS J20KP SMTR LFS J15M SMTR LFS J15K SMTR LFS J15MP SMTR LFS J15KP SMTR LFS 250 160 250 160 250 160 250 160 250 160 250 ± ± ± ± ± ± ± ± ± ± ± 50 50 50 50 50 50 50 50 50 50 50 100,000 2.5 No 200,000 2.5 Yes 100,000 2.5 Yes 200,000 2.0 No 100,000 2.0 No 200,000 2.0 Yes 100,000 2.0 Yes 200,000 1.5 No 100,000 1.5 No 200,000 1.5 Yes 100,000 1.5 Yes Packaging Switches in reels of 2,300 pieces Switches in reels of 2,500 pieces Switches in reels of 3,000 pieces Dimensions of reels according to External diameter 330 mm Environmental OPERATING TEMPERATURE: -40˚C to 85˚C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC61760-1 NOTE: • Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. • The PTS series is not certified for using in Automotive application and no PPAP. However, in the case of some automotive accessories and specific applications for 2 and 3 wheeled vehicles the PTS is widely used and very suitable. Please contact your local C&K representative to discuss your application and the best switch solution. for 2.5 mm height for 2.0 mm height for 1.5 mm height EIA 481B How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. P T S 8 2 0 S M T J R L F Actuator Type J J bend SMT S LFS RoHS, silver plated Height 15 1.5 mm 20 2.0 mm 25 2.5 mm Packaging SMTR Tape & reel Pegs P with pegs Void no pegs Actuation Force M 160 gf K 250 gf Dimensions Dimensions are shown: mm are shown: mm Specifications Specifications and and dimensions dimensions subject subject to change to change 14 Nov 22 B–45 www.ckswitches.com www.ckswitches.com Tactile Switches Specifications PTS820 Series Microminiature SMT Top Actuated 2.5 & 2.0 mm height (H) - version shown here with pegs Tactile Switches B H (0,5) Ø2 2 1 SCHEMATIC 4,3 2 1,5 3,2 1 0,5 2 3,8 0,8 1,4 2,3 2x 1,8 2 2,9 1 1 3,9 1,8 2 Ø 0,6 4,4 ± 0,2 5,1 RECOMMENDED PCB LAYOUT 2 1 6 ± 0 ,3 1 ,7 5 4 7 ,5 +0,1 0 C o v e r ta p e 1 3 1,5 8 CARRIER TAPE 22,4 Max 16,4+2 0 330 13± 0,5 2±0,5 21± 0,8 SEE DETAIL A DETAIL A SCALE 0,5 REEL Dimensions are shown: mm Specifications and dimensions subject to change 14 Nov 22 B–46 www.ckswitches.com PTS820 Series Microminiature SMT Top Actuated (0.5) 1.5 mm height (H) - version shown here with pegs 0 ,5 0,6 Tactile Switches SCHEMATIC 4,3 2 4,5 3,9 0,8 1, 8 1, 8 2 ,9 ± 0 , 2 1 2 1 2x 3,2 1 1 2 3 ,8 1,5 2 1 ,4 2 ,3 2x B 2 1 5,1 RECOMMENDED PCB LAYOUT 1 6 ± 0 ,3 1 ,7 5 7 ,5 2 C o v e r ta p e 1 3 4 +0,1 0 1,5 8 CARRIER TAPE 22,4 Max 16,4+2 0 330 13± 0,5 2±0,5 21± 0,8 SEE DETAIL A DETAIL A SCALE 0,5 REEL Dimensions Dimensions are shown: mm are shown: mm Specifications Specifications and and dimensions dimensions subject subject to change to change 14 Nov 22 B–47 www.ckswitches.com www.ckswitches.com